Kit 87 (1947) Crystal Pick Up and Adaptor |
Mit diesem Kit konnte vom schweren Magnetsystem auf ein
leichteres Kristall-Tonabnehmer umgerüstet werden - für Modell
1015 bis zurück zur Wurlitzer 24 (1938)
Bestehend aus Kristall-Tonabnehmer, Tonarmkabel, Adapter-Box,
Schaltplan. Der sog. Jacobs-Tonarm wurde dafür verwendet. |
|
With this kit the tone arm
with the heavy magnetic catridge could be converted to a lighter crystal
pick up - from model 1015 and backwards to Wurlitzer 24 (1938).
The kit has the crystal pick up, a tone arm cable, the adaptor
box and a schematic. The Jacobs tonearm was used with this kit. |
Photos of Jacobs tone arm courtesy of
coinopwarehouse
|
|
Kit 101 (1947) Light Up
Kit |
Fünf Diffuser
Plastiks und Stoff für obere Rückwand Modelle 1080 und 1080A |
|
Five
diffuser panels and cloth for back upper door for models 1080
and 1080A |
|
|
Kit 102 (1947) Cobra Tone Arm
|
Zur Umrüstung von Wurlitzer1015 und 1080 auf das neue Cobra
Tonsystem |
|
To
convert Wurlitzer 1015 and 1080 to the new Cobra sound system |
|
|
Kit 103 (1947) Conversion Kit
|
Mittels
Kit 103 wurde aus den Modellen 1080
und 1080A das Modell 1080C.
Das Kit bestand aus den Teilen des Drehzylinders, dem
andersfarbigen Grillstoff und den blauen Plastiks.
Zum Einbau des Drehzylinders mußten umfangreiche Ausschnitte an
der Holztür und am Tastaturchrom durchgeführt werden. |
|
With Kit 103
models 1080 and 1080A had been converted into Wurlitzer
1080C.
This Kit did contain the items for the colour cylinder, the
blue coloured grill cloth and the blue plastics.
To mount this kit several cutouts in the door and keyboard
trim needed to be done. |
|
|
Kit 104 (1947) "Personalized Center Panel" Kit |
Für Modelle
Wurlitzer 1080 und 1080A |
|
For
models Wurlitzer 1080 and 1080A |
|
|
Kit 114 (1950) Conversion kit |
Das Kit bestand aus einem Doppeltitelträger, so daß von 24 auf
48 Wahlen umgerüstet werden konnte. Für Modelle 3020 und 3025 |
|
This kit was a double titlestrip holder to convert
from 24 to 48 selections.
For models 3020 and 3025 |
|
|
Kit 142
(1958): Mounting Bracket |
Passend für
Wurlitzer 5250, 5210 und frühere Fernwähler |
|
For
use with Wurlitzer 5250, 5210 and earli9er wallboxes |
|
|
Kit 162C, 162D (1962): Top Tunes |
Passend für Modelle
Wurlitzer 2600, 2610 |
|
For
use with models Wurlitzer 2600 series |
|
|
Kit 163 (1961): Reverbrasonic |
Einheit mit
Hallspirale und Verstärker - passend für Wurlitzer 2500S Serie |
|
Reverbaration Unit and amplifier - for use with Wurlitzer 2500S
series |
|
|
Kit 164 (1961): Intermix 33 / 45 RPM |
Passend für Modelle
Wurlitzer Serie 2500 |
|
For
use with models Wurlitzer 2500 series |
|
|
Kit 183: Cashtrak |
Photo courtesy
Coinopwarehouse
|
|
Kit 240 (1973):
Cable Kit |
Für Stepper 270 -
notwendig um Wurlitzer 1050 mit Stepper 270 und Fernwähler
5225-L/5225A-L zu verbinden |
|
For use with stepper 270;
needed to connect Wurlitzer 1050 with stepper 270 and wallbox
5225-L/5225A-L |
|
Die Angaben haben keinen
Anspruch auf Vollständigkeit oder Richtigkeit.
Bei den (importierten) Boxen können im Laufe der Jahre durchaus
Veränderungen vorgenommen worden sein. Copyright.
<<<
zurück zur
Archiv-Übersicht
|
Ein Service von
Copyright by
Stamann Musikboxen |