Attention: Please read notes below regarding Brexit, shipping information and closing time.

Idler wheel

Product 10 of 66
Zoom
Item #: RO112
some 1960s models, all 1970s up to Rock-Ola 1000, for Intermix 33/45 rpm, centre hole Ø 4.7 mm =3/16"
Cart deactivated

This idler wheel can be found in models 1961 and up to the last vinyl jukebox by Rock-Ola. It is designed to play both 33 and 45 rpm records - those with a small and large centre hole. This feature was called "Mech-O-Matic" by Rock-Ola when advertised in June 1961. Jukeboxes without this feature could be converted too. Because of this it is possible that idler wheel RO112 can be found too in Tempo 1, Tempo 2, Regis, Princess and Empress models if they are equipped with the Intermix-Feature. Also it is possible that later models for 45 rpm only - no Intermix - are equipped with earlier idler wheel RO111 though the parts lists show different.

The idler wheel is made from aluminuim with an extra made rubber ring and a precise bushing. Inner diameter of centre hole: 4.7 mm.

To know if this idler wheel fits your Rock-Ola, please check the following:

  • The rubber is vulcanised to the metal and can't be removed? The inner diameter of the centre hole is 4.7 mm (3/16")? And your jukebox is set up for 45/33 rpm, the so called "Mech-O-Matic" resp. "Intermix" with a turntable with sensor and pin assembly (three moveable bars around a pin in the center) instead of a big center hub?
    In this case you will need this complete idler wheel RO112.
  • The rubber is vulcanised to the metal and can't be removed? The inner diameter of the centre hole is 4.7 mm (3/16")? Your jukebox is set up for 45 rpm only because the TT has been modified so that the three bars are not moveable?
    In this case you will need this complete idler wheel RO112.
  • Or can you remove the old rubber ring of the idler wheel easily? The inner diameter of the centre hole is 5.4 mm (7/32")? And your jukebox is set up for 45 rpm only (no Intermix)?
    If yes, then you will need either the idler wheel RO111 or alternatively only the rubber ring RO115.

Please note: The inner diameter of the centre hole of this idler wheel RO112 is 4.7 mm = 3/16". Please compare.

Reviews

You have to be logged in to write a review.
Paul writes: 24.12.2020
I have been renovating a Gedassa jukebox so parts and advice are hard to come by. With Hildegard's advice I bought this idler wheel (along with spring and grommets) and it was exactly what was required to get the turntable running at the correct speed again. Great 5 star service.
Andy writes: 09.10.2020
Perfect replacement for your old worn out idler wheel
Michael writes: 30.06.2020
Klasse! Toll, daß so ein wichtigen Ersatzteil nachgefertigt wird!
Rüdiger writes: 06.03.2020
Einwandfreies Ersatzteil. Sofort eingebaut. Das "Rumpeln" ist weg. Sehr schneller Versand. Sehr gerne wieder Kunde.
Scheuerer writes: 27.10.2019
Einwandfreie Ware. Das leiern ist jetzt weg.
Peter writes: 24.05.2019
Durch die lange Standzeit hatte das Original Rad eine tiefe Delle was sich durch ein nerviges klacken bemerkbar machte Nun läuft Sie wieder wie sie soll.Super Qualität, passt perfekt.
Thomas writes: 20.05.2019
Perfekt! Jetzt läuft die Box wieder mit der korrekten Geeschwindigkeit. Vielen Dank!
André writes: 20.04.2019
Perfekt. Schön, dass diese Teile wieder verfügbar sind.
Georg writes: 22.02.2019
schnelle Lieferung; Einbau ohne Probleme; Zwischenrad passt genau; gute Verarbeitung; dreht einwandfrei
Thorsten writes: 28.10.2018
Passte perfekt in meine 453. Keine Geräusche mehr :)
Jens writes: 06.02.2018
Das Originale alte Rad hatte mehrere "Dellen", wodurch man beim abspielen stets ein "tocktock" hörte. Nach Austausch alles wieder gut. Rad passt 1:1 bei der 443. Lieferung innerhalb von 3 Tagen.
Norbert writes: 10.01.2018
Top Qualität,
gestern bestellt, heute da. Zwischenrad sofort eingebaut und was soll ich sagen.
Ich bin absolut begeistert. Der Plattenteller dreht absolut gleichmäßig.
Bin voll zufrieden.
* incl. tax, plus shipping