50 Hz conversion spring

Product 44 of 60
Zoom
Item #: A010
to convert 60 Hz TT-motors to 50 Hz
AMI F80 and up to models 1979

This spring - made from stainless steel - is used to convert 60 Hz. TT-motors to 50 Hz - starting with model F80 and F120. Therefor the spring needs to be screwed on the top of the shaft of the TT-motor like illustrated.
Original part number: F-2076.

  • F80, F120
  • G80, G120, G200
  • H100, H120, H200
  • I-100, I-120, I-200
  • J-100, J-120, J-200
  • K-100, K-120, K-200
  • Lyric
  • Continental, Continental 2
  • JAL, JEL
  • JBM, JAN, JAO
  • MM-1, MM-2, MM-3, MM-4, MM-5, MM-6
  • CMM-1, CMM-3, CMM-4, CMM-5
  • RI-1, RI-1G, RI-2
  • TI-1, TI-2
  • CTI-1, CTI-2
  • R-74, R-80, R-80S, R-81, R-82, R-83
Please note: This spring is only needed for new imported US models. Those jukeboxes which had been operated in Europe already don't need it as they are already converted.

Reviews

You have to be logged in to write a review.
Josef writes: 15.12.2023
Passt perfekt! Kann wie beschrieben per Hand auf die Welle gedreht werden, wobei ich die Welle weiter unten mit einer kleinen Flachzange gehalten habe.
peter writes: 18.09.2022
Fits perfectly. Good product.
Giuseppe writes: 27.01.2021
Passt einwandfrei
Thomas writes: 13.05.2020
Passt sehr gut.
Montage mit etwas Geduld unproblematisch.
Roger writes: 22.03.2020
I finally managed to put the spring in place and it works fine !! Very exact speed .
Roger writes: 18.03.2020
Does not fit my jukebox - The interior diameter of the spring is to small , hence I can’t install it on the top shaft of the TT - motor .
There was already a spring on the top shaft of TT - but I damaged it so I needed a replacement of the old spring , not a new spring to put above the original spring ... so I don’t understand sorry ...
Michael writes: 06.02.2020
Passt perfekt!
Robert writes: 04.12.2019
vite pose ,rien a regler !! c'est parfait
stuart writes: 27.06.2019
Good quality item and easy to fit (if required)
* incl. tax, plus shipping